Troubleshooting Mazda 3 Starter Problems: A Guide
ΠΠ±Π·ΠΎΡ Π°Π²ΡΠΎΠΌΠΎΠ±ΠΈΠ»Ρ
The Mazda 3 has carved a niche for itself in the compact car market, being a blend of style, performance, and practicality. Known for its nimble handling and fuel efficiency, the Mazda 3 appeals to both young drivers and seasoned car enthusiasts seeking a reliable yet engaging ride.
ΠΡΠ½ΠΎΠ²Π½ΡΠ΅ Ρ Π°ΡΠ°ΠΊΡΠ΅ΡΠΈΡΡΠΈΠΊΠΈ
The Mazda 3 boasts a sleek exterior design, characterized by its smooth lines and bold front grille. Inside, the finishing touches are nothing short of premium, with high-quality materials and an intuitive layout that eases the driving experience.
- Dimensions: The Mazda 3 measures around 180 inches in length, providing ample space for both passengers and cargo.
- Fuel Economy: Known for its economical performance, users typically report around 28-36 miles per gallon, depending on driving habits and engine choice.
- Technology Features: The vehicle includes modern technology such as a touch-screen interface, smartphone connectivity, and an impressive sound system.
ΠΠΏΠΈΡΠ°Π½ΠΈΠ΅ Π΄Π²ΠΈΠ³Π°ΡΠ΅Π»Π΅ΠΉ ΠΈ ΡΡΠ°Π½ΡΠΌΠΈΡΡΠΈΠΉ
Mazda offers various engine options, catering to the desires of diverse drivers. Standard options include:
- 2.0-Liter Four-Cylinder Engine: Usually delivers a solid balance of power and efficiency, generating around 155 horsepower, ideal for daily commuting.
- 2.5-Liter Four-Cylinder Engine: For those who seek a little more zest, this engine kicks in 186 horsepower, elevating the driving experience significantly.
Transmissions vary, with both automatic and manual options available, allowing the driver to choose based on comfort and driving style. The choice between a six-speed automatic or a six-speed manual can influence the vehicleβs responsiveness and fuel efficiency.
ΠΡΠ±ΠΎΡ Π°Π²ΡΠΎΠ·Π°ΠΏΡΠ°ΡΡΠ΅ΠΉ
Choosing quality parts is crucial, especially when dealing with starter issues. Whether youβre repairing your own vehicle or working professionally, understanding the kinds of parts needed will save you time and trouble.
Π Π°Π·Π½ΠΎΠ²ΠΈΠ΄Π½ΠΎΡΡΠΈ Π·Π°ΠΏΡΠ°ΡΡΠ΅ΠΉ
Car parts can be broadly categorized as:
- Genuine Parts: These are made by the manufacturer; they tend to fit perfectly and often come with a warranty.
- Aftermarket Parts: Offering various options, these may be less expensive but vary significantly in quality. Conducting research before purchase is essential.
- Used Parts: Sometimes a good choice for budget-conscious individuals, but one must consider wear and tear effects.
ΠΠ°ΠΊ Π²ΡΠ±ΡΠ°ΡΡ ΠΊΠ°ΡΠ΅ΡΡΠ²Π΅Π½Π½ΡΠ΅ Π·Π°ΠΏΡΠ°ΡΡΠΈ
When selecting parts, consider the following:
- Compatibility: Double-check if the part is specifically designed for the Mazda 3 model year you own.
- Reviews: Research online reviews from platforms like Reddit or car forums to gather insights from other Mazda 3 owners.
- Warranty and Return Policy: Ensure quality assurance through a solid warranty or return policy. A reputable dealer will provide some guarantee on their products.
Important: Choosing the right parts plays a significant role in resolving starter issues effectively and ensuring the longevity of your Mazda 3.
Understanding the Mazda Starter System
Understanding how the starter system operates in a Mazda 3 is crucial for anyone looking to diagnose starting issues effectively. This knowledge not only allows car enthusiasts and mechanics to pinpoint problems faster but also helps them make informed decisions regarding repairs or replacements. In this section, we will delve into the components of the starter system and explore its workings in detail, providing a solid foundation for identifying and resolving starter-related issues.
Components of the Starter System
The starter system in the Mazda 3 consists of several key components that work together to initiate the engine's operation. Each part plays a vital role, and being familiar with them can significantly enhance the troubleshooting process:
- Starter Motor: This is the star of the show. It's a small electric motor that draws power from the battery and turns the engine's flywheel to start the vehicle.
- Ignition Switch: When you turn the key or push the start button, the ignition switch sends a signal to the starter motor to commence operation.
- Battery: Acts as the powerhouse, providing the necessary voltage to the starter motor and other electrical systems in the car.
- Starter Relay: This component acts as a switch that helps start the starter motor by allowing higher currents to flow when needed without overworking the ignition switch.
- Wiring Harness: All these components are interconnected through wiring, ensuring that the electrical currents travel smoothly between each part.
Understanding these components helps in troubleshooting since failure in any single part can disrupt the entire starting process.
How the Starter Functions
To appreciate how the starter works, it helps to visualize the entire process, which is simpler than it sounds. When you turn the ignition key or press the start button, the ignition switch closes the circuit and allows power to reach the starter motor.
- Ignition Process: Once the ignition switch activates, the battery sends current to the starter motor, prompting it to engage.
- Engagement of the Starter: The starter motor then turns a small gear called the "pinion" that meshes with the larger gear on the engine's flywheel, causing it to spin.
- Engine Initializing: This rotation begins the engine's cycle, drawing in air and fuel while the pistons move within the cylinders.
- Disengagement: After the engine fires up, the starter motor disengages automatically, preventing damage to both the starter and engine components.
The symbiotic relationship between the battery, ignition switch, and starter motor is what makes or breaks the starting process in your Mazda 3. If any link in this chain fails, the result is often disappointingβand frustrating.
Understanding how the starter system functions and its components is fundamental for effective troubleshooting. This knowledge can lead to quicker diagnostics and fewer headaches when it comes to addressing starting issues in the Mazda 3.
Symptoms of Starting Failure
Diagnosing starting issues in your Mazda 3 can often feel like trying to read a book in a foreign language. Knowing the signs of a starting failure is vitalβit can help you pinpoint the root cause quickly and can save both time and money when it comes to repair. Symptoms act as the breadcrumbs guiding you through this maze.
Many drivers often turn a blind eye to subtle hints of trouble before a complete breakdown occurs. Addressing the symptoms early can lead to easier fixes, which is why identifying them matters.
Starter Spins but Engine Doesnβt Start
When you turn the key or press the start button, you expect the engine to roar to life. But what happens when the starter engages, and all you get is the sound of it spinning without any effort from the engine? This chilling scenario can stem from different factors.
Hereβs what to consider:
- Fuel Supply Issues: Sometimes itβs as simple as running out of gas or a faulty fuel pump. If the engine doesnβt receive fuel, it wonβt start, no matter how well the starter works.
- Airflow Restrictions: A clogged air filter or intake can hinder performance, preventing combustion.
- Ignition Failures: Defective spark plugs or ignition coils could stop the engine from igniting the air-fuel mixture.
- Mechanical Failures: This could range from a timing belt issue to internal engine damage.
Clicking Noises from the Starter
Youβre sitting in your Mazda 3, turning the key, and all you hear is a series of annoying clicks. This sound can evoke an unsettling realization: somethingβs not right.
The most common causes of these clicks include:
- Weak Battery: When the battery is low on charge, it may supply just enough power to engage the starter solenoid, but not enough for the starter motor to crank the engine.
- Bad Starter: If the starter itself is on its last legs, it wonβt complete the circuit needed to turn the engine over.
- Corroded Connections: Poor electrical connections can lead to insufficient power reaching the starter motor.
A good first step to diagnose this is to check the battery voltage or jump-start the car to see if it alleviates the clicking sound.
Dashboard Lights and Indicators
If youβve ever looked at your dashboard and felt bombarded by a constellation of warning lights, you are not alone. When your Mazda 3 is not starting, these lights can provide some clues about the underlying issues.
- Battery Warning Light: If this light illuminates, it might indicate a battery thatβs on its way out or other electrical issues.
- Check Engine Light: This could point to various problems that range from simple to more severe. The only way to know is to have it scanned for trouble codes.
- Security or Immobilizer Light: If this light is flashing, it could mean the vehicle's security system is preventing the engine from starting, often due to key-related issues.
Knowing what the lights mean might help you take the appropriate steps before heading to a mechanic.
In summary, recognizing these symptoms of starting failure lays the groundwork for effective troubleshooting. By understanding what each issue may signify, you can better navigate your way towards a solution that gets your Mazda back on the road.
Common Causes of Starter Issues
Understanding the common causes of starter issues in the Mazda 3 is crucial for effective troubleshooting. When the car refuses to start, it can be frustrating. Identifying the root of the problem helps in applying the right solutions efficiently. Each of these causes can affect the overall functionality of the starter system, leading to wasted time and potential costs if not addressed promptly. Being aware of these possibilities aids car owners and mechanics alike to act quickly before deeper electrical or mechanical issues arise.
Battery-Related Problems
Battery Age and Condition
The age and condition of the battery is a major player in determining whether the starter can properly engage. Over time, batteries wear out. A typical car battery will last between three to five years, depending on usage and maintenance. An older battery, regardless of appearance, may not hold sufficient charge to start the engine effectively.
The key characteristic of an old battery is its declining capacity. It may still give the impression of workingβlights can still shine brightly, but it cannot crank the starter motor efficiently. This point is particularly important for those looking into starter issues in their Mazda 3, as replacing an old battery can bring the vehicle back to life with little hassle. If the car has never had the battery tested as it approaches the three-year mark, now might be the priviledged time to do so.
The unique feature of assessing battery condition includes checking the specific gravity of the electrolyte using a hydrometer, a detailed yet effective process to determine how well the battery is functioning. One advantage of focusing on battery age and condition is the cost-effectiveness of simply replacing a battery compared to the prices of more complicated starting issues.
Corroded Terminals
Corroded terminals can be a silent antagonist in many starting failures. When battery terminals get corroded, the connection between the battery and starter becomes impeded, leading to voltage drops. This can often confuse mechanics and owners, who may suspect starter or wiring issues instead.
The key characteristic of corroded terminals is their impact on electrical conductivity. The corrosion can appear as a white, fuzzy substance around the terminals. This can be a concern for any vehicle, especially the Mazda 3, since it can lead to intermittent starting issues or even total failure to start, depending on the severity.
One unique feature about terminal corrosion is that it can often be addressed using simple cleaning solutions, like a mixture of baking soda and water, followed by a thorough rinse and re-tightening of connections. The advantage here is remarkable: spending a bit of time cleaning terminals can save a driver from a trip to the mechanic.
Faulty Ignition Switch
A faulty ignition switch can make the quest to start one's Mazda 3 feel like an uphill battle. This switch essentially serves as the gatekeeper for electricity flowing to the starter motor. Signs of a malfunction might include only partial contact, where the vehicle might crank but does not engage. In some cases, accessories might work while the engine refuses to start.
The benefit of identifying a faulty ignition switch is that, once diagnosed, itβs often straightforward to replace. Knowledgeable car enthusiasts can locate this component quite easily and manage a swap without help. Thus, understanding its role brings a quicker resolution to starting dilemmas.
Malfunctioning Starter Motor
When the starter motor itself becomes the issue, it can often mean a full breakdown at any given moment. A malfunctioning motor can result in only faint clicking sounds or no sounds at all when the key is turned.
It's important to investigate further to determine whether the starter motor is mechanically or electrically compromised. If it's electrical, that's often more straightforward to fix; if mechanical, you may need to go deeper and consider replacements. Knowing potential starter motor issues allows Mazda 3 owners to differentiate between mechanical sounds and electrical failures during the diagnostic phase.
Clutch Interlock Switch Issues
For those with manual transmissions, the clutch interlock switch can be a sneaky culprit. This safety feature ensures the vehicle cannot start unless the clutch pedal is pressed. A malfunctioning switch can result in a vehicle that appears completely dead, without any noise at all. If suspected, a bypass test can be performed to see if the car starts with the switch temporarily bypassed.
Understanding clutch interlock issues not only provides peace of mindβranging from no investment to a simple fixβbut also allows for a comprehensive check of safety protocols when diagnosing starting issues.
Wiring and Connection Failures
The wiring that connects different starter system components can also lead to issues. Wire damage, poor connections, or corroded terminals can disrupt power flow. A thorough visual inspection can identify frayed, broken, or disconnected wires.
Addressing wiring or connection failures doesnβt just keep a Mazda 3 starting smoothly; it can also enhance the overall reliability of the vehicle. Getting to grips with these potential electrical nightmares means a well-prepared mechanic will tackle issues with knowledge and confidence.
Diagnosing the Problem
Diagnosing the starting problems in a Mazda 3 is a crucial step for any car owner or mechanic. A thorough diagnosis can save you time and money, avoiding unnecessary repairs or parts replacement. Understanding the root cause of the issue helps in pinpointing whether itβs an electrical fault, a mechanical failure, or something as simple as a loose wire. Without proper diagnosis, one might mistakenly believe that the starter motor needs replacing, only to find out later that the problem lay somewhere else entirely.
By systematically following the diagnostic steps, you can not only identify the problem but also learn more about your vehicleβs systems. This empowers you as a car owner, giving an insight into what's happening under the hood. Plus, a well-diagnosed problem often leads to quicker resolution, and in turn, keeps your Mazda 3 running smoothly.
Preliminary Checks
When dealing with starter issues, preliminary checks are your first line of defense. Two essential methods for these checks are a visual inspection of connections and a battery voltage test.
Visual Inspection of Connections
The visual inspection of connections is a straightforward yet vital task in troubleshooting starter issues. It involves looking over the entire starter system for any loose wires or corroded connections that might impede the electrical current. Often, a simple visual check can bring to light the most glaring issues, such as frayed wires or bad solder joints.
This method is popular because it doesnβt require special tools, and most of the time, you only need good lighting and a keen eye. The key characteristic here is that it can save valuable diagnosis time by directly highlighting areas needing attention. However, itβs worth noting that while visual inspections can catch obvious issues, they may not reveal deeper electrical problems, so they should always be the first step, not the only one.
Battery Voltage Test
The battery voltage test serves as a critical check for diagnosing starting issues. A low or unstable battery might be the culprit in many cases. Conducting this test helps you understand the battery's state, determining whether it's time for a replacement or just recharging.
The main advantage of the battery voltage test is its ability to provide quantifiable data rather than just visual assumptions. By using a multimeter, you can measure the batteryβs voltage, which should be around 12.6 volts when fully charged. If it's significantly lower, thatβs likely your problem. However, the downside is that it requires a tool and some knowledge of how to interpret the results, which might be a barrier for some owners.
Testing the Starter Motor
Testing the starter motor is another vital step in diagnosing a stubborn starting issue. It often involves techniques like bench testing and voltage drop testing. Knowing how to perform these tests can significantly streamline the diagnosing process.
Bench Testing
Bench testing involves removing the starter motor from the Mazda 3 and connecting it directly to a power source to see if it functions properly. This method is crucial because it isolates the starter from any other potential issues in the car, confirming whether the problem lies within the starter or elsewhere.
People often find bench testing beneficial as it can reveal defects that you might not notice with other tests. However, the major drawback is that it requires more time and effort since you need to disassemble some components to reach the starter motor.
Voltage Drop Test
The voltage drop test checks for excessive resistance in the starter circuit. By measuring the voltage at the starter while someone attempts to crank the engine, you can identify if the starter isnβt receiving enough power due to faulty wiring or connections. This method is widely regarded as a reliable way to troubleshoot electrical issues in the starter system.
One of the unique features of the voltage drop test is its ability to highlight weaknesses in the electrical pathway, which may be overlooked otherwise. Nonetheless, using this method can be a bit tricky for those unfamiliar with electrical systems, as it involves a clear understanding of voltage and how to properly connect testing equipment.
Verifying the Ignition Circuit
Verifying the ignition circuit is another essential step in the diagnostic process. If everything with the starter and battery checks out, the issue could lie in the ignition system itself. This involves checking the ignition switch and fuses to ensure they are functioning correctly. Any failure in the ignition circuit may prevent the starter from receiving the signals it needs to operate.
Assessing the Battery Performance
Assessing the battery performance is a final check in troubleshooting starter issues. The battery's health isnβt just about its voltage β itβs also about its ability to deliver power under load. Using a load tester can help confirm if the battery can hold a charge when the engine is cranked, an essential check to fully rule it out as a potential cause for starting troubles.
By following these diagnostic steps, you lay the groundwork for effectively troubleshooting starter problems in your Mazda 3, setting the stage for resolutions that can restore your vehicleβs performance.
Solutions to Starting Problems
When faced with a stubborn Mazda 3 that refuses to start, the solutions become paramount. This section delves into practical steps that car owners and mechanics can take to remedy starting issues. By addressing specific problems methodically, one can restore functionality effectively. Understanding and implementing these solutions not only improves the vehicle's performance but can also save time and money in the long run. Hereβs a focused look on how to tackle each of these common issues.
Replacing the Battery
A battery replacement is often the first logical step in diagnosing starter issues. Over time, batteries can lose their capacity significantly, especially if they are several years old. When replacing the battery, consider opting for a high-quality one that matches the specifications provided in the ownerβs manual. Installing a fresh battery can sometimes resolve starting concerns, especially if the existing battery shows signs of wear like swelling or leakage.
Benefits of Battery Replacement:
- Improved Performance: New batteries provide stable voltage and reliable power to the starter.
- Enhanced Longevity: A good battery helps other electrical components function smoothly, extending their lifespan.
When changing the battery, make sure to clean any corrosion from the terminal connections. A tight connection is crucial; loose terminals can lead to starting issues even with a new battery in place.
Repairing or Replacing the Starter Motor
If replacing the battery doesnβt yield results, then the starter motor itself could be the culprit. Starter motors can wear out or even experience internal failures. To assess, one might conduct a bench test or have a professional mechanic do so.
Repairing vs. Replacing:
- Repairing might involve fixing minor issues such as faulty wiring or cleaning up dirty components.
- Replacing the starter motor is often necessary if thereβs significant damage or if it fails to engage properly even after repairs.
Take note that any signs of smoke or unusual noise when the ignition is engaged usually signal deeper issues within the starter that require replacement.
Fixing Electrical Connections
Electrical problems are a common suspect in starter issues. Over time, wires can corrode, and connections can loosen, leading to intermittent starting failures. Conducting a thorough check of the wiring harness and connections to the starter is essential.
Steps to Fix Electrical Connections:
- Conduct a visual inspection to identify signs of wear or corrosion.
- Clean all connections and terminals.
- Ensure that all wires are securely attached and free from fraying or damage.
Correcting these connections can often resolve starting troubles without the need for component replacement. Remember, a sound electrical connection is vital for the overall health of your vehicleβs starting system.
Addressing Mechanical Malfunctions
Lastly, mechanical issues within the starter assembly can be just as problematic. This could range from low lubricant levels affecting the gear's functionality to physical obstructions preventing proper engagement.
Given that the starter is a mechanical device, inspecting it for any foreign objects or debris is wise.
Possible Mechanical Issues to Consider:
- Wear on Gear Teeth: If the gears are worn down, they may not engage properly.
- Physical Obstructions: Ensure there are no items blocking the starter's operational path.
If mechanical issues seem severe, it might be worth consulting a professional for repair or replacement recommendations as DIY solutions can often complicate matters further.
In addressing these solutions to starting problems, one increases the chance of bringing the Mazda 3 back to life efficiently. Implementing these steps with careful consideration allows car owners to take proactive measures to maintain their vehicle.
Preventive Measures for Future Issues
Preventing starter issues before they occur can spare Mazda 3 owners from unexpected breakdowns and costly repairs. It's like an ounce of prevention is worth a pound of cure. A few well-planned maintenance strategies can go a long way in ensuring that the starter system remains in tip-top shape. As the saying goes, an ounce of prevention is worth a pound of cure; investing some time in preventive care yields peace of mind on the road.
Regular Maintenance Checks
Conducting regular maintenance checks is a cornerstone of car care, particularly for the starter system. It helps in catching issues before they snowball into bigger problems.
Battery Inspections
Battery inspections are vital as the battery is the lifeblood of the starting system. Ensuring that itβs in working order can prevent many starting failures. A good battery should show snug connections and appropriate levels of charge. Key characteristics include appearance, age, condition, and terminal cleanliness.
What makes battery inspections a smart choice is their simplicity and effectiveness. Every couple of months, a visual check to confirm that terminals are clean and connections tight can save a world of trouble later. By addressing corroded terminals or signs of wear early on, you can extend the overall life of the battery.
The unique feature of battery inspections lies in their straightforward methodology. No fancy tools are required; just a little elbow grease and an eye for detail. While the benefits are clear, it's worth noting that neglecting this process can result in not only battery failure but can also be an inconvenience when you're in a hurry to get someplace.
Starter System Assessments
Starter system assessments are another area that shouldnβt be ignored. They involve a thorough check of all components in the starting system, not just the battery. The assessment could include inspecting wiring, connections, and even the starter motor itself.
These assessments play a crucial role in nipping potential issues in the bud before they escalate into more serious matters. A particularly beneficial aspect is the chance to identify wear and tear in components early, which might otherwise go unnoticed until something fails.
The distinctive feature of starter system assessments is their holistic approach. Rather than focusing solely on one part, they give a complete picture of the starting systemβs health. However, the downside could be that these assessments can take a bit more time and effort compared to a quick battery check, but results often prove worthwhile.
Best Practices for Battery Care
Taking good care of your battery is essential for its longevity and, consequently, the overall functioning of your Mazda 3. Initiating daily routines can create lasting impacts. For instance, parking in shaded areas or keeping your battery clean can help ward off environmental stresses that could lead to premature battery failure. Making sure that your battery connections are snug and free of corrosion is a sure-fire way to avoid issues.
In summary, preventive measures are like maintaining a well-tuned instrument; a little patience and diligence can keep your Mazda 3 running smoothly for years to come. By conducting these simple checks in regular intervals, you're leaning into preventive care and steering clear of unwelcome surprises.
It's not just about fixing problems when they pop up; it's about anticipating them before they become headaches.
Ending
The importance of wrapping up the diagnosing starter issues in Mazda 3 cannot be overstated. A clear conclusion serves not only as a summary but also as a touchstone for the valuable insights gathered throughout the article. By recapping the critical steps involved in diagnosing starter issues, youβre cementing an understanding of the potential faults that can arise and the systematic approach necessary to tackle them. This knowledge empowers Mazda 3 ownersβwhether they're weekend DIYers or seasoned mechanicsβto address starter concerns with confidence.
Having explored the various causes and symptoms of starting failures, you've probably realized that many issues often stem from simple factors like battery condition or corroded terminals. Recognizing these not-so-obvious culprits enhances your troubleshooting efficiencyβyou can avoid the wild goose chase of unnecessary repairs or component replacements. Additionally, knowing how to meticulously test and assess both electrical and mechanical parts paves the way for more informed decisions regarding repairs.
Moreover, the article highlights the necessity of proper maintenance. By adhering to preventive measures discussed, one can significantly reduce the likelihood of starter-related troubles in the future. The insight provided here doesnβt just focus on fixing problems; it advocates for a proactive approach, keeping your Mazda running smoothly.
In short, the tips, techniques, and tricks shared provide a framework for understanding starter issues deeply. This knowledge is an invaluable asset that not only saves time and money but also enriches oneβs appreciation for the intricacies of automotive systems.
Recap of the Diagnostic Steps
In revisiting the diagnostic steps, itβs important to review everything methodically. Hereβs a clear breakdown:
- Preliminary Checks: Look for visible signs of damage and test the battery voltage. This initial step saves you from misdiagnosing battery-side issues.
- Testing the Starter Motor: Use bench testing and the voltage drop test to assess the health of the starter motor itself. Distinguishing performance failures is vital here.
- Verifying the Ignition Circuit: Ensure thereβs no interruption in the circuit flow. A minor fault here can stop the entire system in its tracks.
- Assessing Battery Performance: Dive deeper into battery health if issues persist. Testing under load may shed light on underlying battery problems.
This structured approach fosters clarity, allowing you to tackle the issue step by step.
Encouragement for Proper Maintenance
Finally, the essence of proper maintenance bears repeating. The key takeaway here is that an ounce of prevention is worth more than a pound of cure. Regular checks can do wonders in extending the life of both your starter system and the battery.
Here are some practical tips:
- Schedule Regular Inspections: Just like routine check-ups for your health, your car deserves the same attention. Regularly inspect the starter system components and battery conditions.
- Battery Care Best Practices: Clean corroded terminals, check for fraying wires, and ensure a snug fit to avoid power loss.
- Stay Observant: Pay attention to unusual sounds or dashboard indicators, as these can often be the first signs of trouble.
Taking these steps not only prevents starter issues but also fosters a deeper connection to your vehicle, enhancing not just performance, but also enjoyment of the ride. Be proactive, and your Mazda will reward you with reliability on the road.
